Deco 40 Course

Open Circuit Deco 40 CourseThis program qualifies divers, with standard open circuit SCUBA equipment, to do dive to 40 metres / 132 feet and complete dives with mandatory decompression stop requirements for up to maximum of 10 minutes, whilst breathing Air or Nitrox.

PREREQUISITES
To be a minimum of 16 years old.
To be certified diver for at least 3 months.
Certified RAID Open Circuit Level 2 diver or equivalent certification/s including Navigation, Night/Restricted Visibility certificates or equivalent. The instructor is to evaluate these skills.
20 logged hours underwater using open circuit.
Documented proof of prerequisite requirements needs to be presented to the Dive Centre for approval prior to any in water training.

EQUIPMENT REQUIREMENTS
For this course you will required to have use of the following:
Single cylinder; the gas volume shall be no less than 2400 lt / 80 cu ft
Single cylinder pillar valve shall have a DIN preferred valve fitting
1 x first stages
2 x Standard second stages (Primary second stage preferred on 2m/6.5ft PL hose)
1 x SPG
1 x BCD/wing LP hose
1 x Single/multi gas Nitrox dive computer
1 x dive timer or enriched air (Nitrox gases) computer.
1 x slate
1 x SMBs and reel
1 x knife
1 x dive masks
1 x torch/light/underwater lamp
1 x BCD/wing with adequate lift capacity
1 x exposure suit – a dry suit shall have interchangeable inflator system with BCD LP hose

COURSE CONTENT
Complete, before in water training, the on-line e-learning academic presentations, quizzes, exam
Review Personal Diving skills
Dive Planning Assignments
Practical skills as detailed
Confined water and open water sessions, totalling a minimum of 4 hours underwater