Deep Blue Pirates Rebreather Ltd. are proud to be appointed as a dealer for the Hollis Prism 2 Rebreather, ideal for exploring open ocean, caves, or wrecks. This unit can be electronically or manually controlled which means you choose how you want the loop PPO2 maintained.
The PRISM 2 is an electronically or manually controlled, constant PO2, modular, closed-circuit diving system. CE approved to EN 14143:2013
Includes option for front-mounted or back-mounted counterlung. Combined with the rear mounted radial scrubber, the Hollis Prism 2 provides easy breathing with low resistive effort and low hydrostatic loading. The Hollis Prism 2 has also been tested by ANSTI at 100M and has the lowest WOB of any mixed gas CCR on the market at 0.94 J/L. The standard kit includes an electronic secondary control and primary LED displays with a backplate/wing assembly that provides a complete kit ready to dive out of the box. Tanks and valves are purchased separately.
Its breathing loop which is a keyed one-way assembly consists of a closeable mouthpiece assembly with mushroom check valves on either side, which ensure uni-directional flow.
Prism 2 now includes the option of front mounted or backmounted counterlungs. Combined with the rear mounted radial scrubber, the Prism 2 provides easy breathing with low resistive effort and low hydrostatic loading.
These counterlungs are fitted with both automatic and manual gas addition systems and a variable volume control valve (only on FMCL version) that is used upon ascent to vent excess expanding gas volume or to purge the loop. Diluent addition is automatically achieved as hydrostatic pressure increases and the counterlung collapses against the valve actuator.
Back-mounted counterlung positions lungs behind the diver leaving the chest free for attachment of additional tanks and accessories. This also allows improved streamlining with less drag and better horizontal trim.
Features a two-piece bag design for improved WOB performance and easy removal of the internal lung for cleaning or replacement. ADV Upstream Valve design is reliable and resistant to free flow which is a benefit for the addition of valuable diluent gas. All gas delivery systems on the Prism 2 have both automatic and manual function. Water Trapping T-pieces keep excess water from the breathing loop inside the counterlung for easy draining. Streamlined Hose Fittings keep LP hoses routed inside closest to the diver which avoids overhead interference. Machined DIL and O2 MAV controls ensure a rugged and reliable design, also allowing offboard gas plugin on both sides.
Dual, front-mounted counterlungs provide the diver with a flexible reservoir equivalent to the maximum displacement of the diver’s own lung volume and ensures the lowest possible hydrostatic loading.
These counterlungs are fitted with both automatic and manual gas addition systems and a variable volume control valve (used upon ascent to vent excess expanding gas volume or to purge the loop). Diluent addition is automatically achieved as hydrostatic pressure increases and the counterlung collapses against the valve actuator.
Rear-Mounted Radial Scrubber
The Prism 2 utilizes a user-packed, radial 2.5kg CO2 scrubber, which features the best possible duration, insulation and work of breathing on the rebreather. The scrubber canister is mounted vertically on the backplate and between twin supply cylinders (one each, oxygen and diluent).
The clear scrubber bucket is molded from Engineered Thermoplastic. This Hollis exclusive design ensures the CO2 scrubber is installed, packed and provides a visual for positive loop integrity.
With the electronics switched on, the secondary also provides a status check for the battery and displays the set point selected for the dive along with other critical information. The electronics vote between the three proprietary galvanic sensors and control the operation of a low wattage solenoid valve on the oxygen supply.
Prism 2 now supports the latest in oxygen sensor technology featuring:
- Warn for use of sensor past expiry date
- Advance warning for sensor ordering/replacement
- Check proper sensor model/type
- Provide date of last calibration
Heads-Up Display (HUD)
The Primary Display (HUD) consists of 3 bicolour (red/green) LEDs mounted on either the right or left side of the DSV/BOV mouthpiece just below eye level. Each LED provides a status indicator for its corresponding O2 sensor by using a “Smithers Code” flashing the status on a cycling 5-second loop during the dive.
The Shearwater Petrel is the computer display on the Prism 2 and was chosen for this application as it is one of the most advanced mixed gas CCR computers available today. The Petrel is designed to control the Prism 2 setpoint and uses a basic decompression algorithm known as Buhlmann ZHL-16C which has been modified by the use of Gradient Factors.
- Open Circuit / Closed Circuit w/ Fixed
- PP02 or External PPO2
- 2-Button Push OC Bailout
- Air, Nitrox, Trimix and Heliox
- Gradient Factors Conservatism
- User Entered GF
- Easy to Read
- Simple to Use
- Adaptive Menus
- Large OLED Display
- Automatic Setpoint Switching
- Ascent Rate Display
- Battery Warning
- Battery Voltage
- Metric with 1 Decimal Place and Imperial
- CNS Tracking
- Automatic Backlight
High-Performance DSV and BOV
Every Hollis Prism 2 ships complete with a DSV (Dive Surface Valve) standard and BOV (Bailout Valve) as an available option. The BOV features a high-performance regulator valve, is incredibly lightweight and is a direct bolt on for your Prism 2 to replace the DSV.
The Prism 2 BOV is considered a basic safety device for the rebreather by many professionals and meets the requirements for training in Technical rebreather courses
A Full Range of Customisation Options
Ordering a Hollis Prism 2 has never been easier. Quickly add accessories such as our high performance BOV, tanks and valves, wing and harness type, all right from the factory.
Full Feature List
- Choice of front-mounted or back-mounted counterlungs
- Industry-best work of breathing (WOB) and hydrostatic loading
- Back-mounted counterlungs for improved streamlining with less drag and better horizontal trim. Also features a new upstream valve design.
- Unit weight fully-charged, in standard configuration – approx. 21kgs
- 3.5 litre split counterlungs allows inhale and exhale counterlungs for high workloads
- Counterlung drains make it easy to remove water during a dive
- All gas lines external to the breathing loop prevents leaks from affecting the PPO2
- Automatic diluent addition valve adds diluent during descent or when the loop volume is low
- Manual diluent addition valve adds on-board or off-board diluent for loop flushing
- Gases: Air, Trimix, and Heliox
- Manual oxygen addition valve allows for manually controlling oxygen PPO2
- Bail out valve option gives high-performance open circuit bailout
- Integral harness and BC or Backplate standard makes the Prism 2 ready to dive out of the box
- Full range of wings/harness gives the ultimate customization
- Accepts 2 litre and 3 litre cylinders with the supplied tank band for flexible gas management
- Eye-level LED primary display provides easy to monitor system status
- Displays PPO2 for each oxygen sensor, used to control PPO2 manually and assure electronics system is nominal
- External power switch is easy to power on
- Push-Button O2 calibration so easy to calibrate
- Large OLED secondary display is easy to read, even for your buddy
- PPO2 monitoring of three sensors gives continuous display of each sensor’s PPO2, MV reading easy to access
- Air, Nitrox, Trimix and Heliox Ready for any dive plan
- Closed circuit & open circuit, 5 gases, supports diluent switching & multi-gas mix dive plans
- 2-Button push OC bailout – if you have to leave the loop, quickly switches to bailout support
- CNS tracking % CNS based on real time oxygen exposure
- Software update via web available
- Bluetooth Dive log download and software updates
|Length||53.3 cm (21 in)|
|Width||43.2 cm (17 in)|
|Depth||22.9 cm (9 in)|
|Weight||21.3 kg (47 lb) with tanks|
|Scrubber Flow Design||Radial|
|Counterlungs||Front Mount 3.5L / Back Mount 4.0L|
|PO2 Set Points||Adjustable (0.7, 1.0, 1.2, 1.3, 1.4)|
|O2 Sensors||3 Galvanic|
|Sensor Life||12 months in air or 100 hours dive time|
|Heads Up Display||Yes, 9V battery powered sequential LED|
|Handset||Yes, (Shearwater Petrel) Powered by Lithium Cell|
|Battery Type||9V Alkaline / 3.6v Lithium Cell|
|Battery Life||40 Hours|
|Automatic Setpoint Switch||Yes|
|Integrated Weight System||Yes (Optional)|
|Scrubber Duration||EN 14143 testing rated the Prism 2 at 40m 4 Deg C (1.6L/min of Co2) at 190mins/3 hours 10mins on AIR Dil and 215mins/3 hours 35mins on Trimix|
The standard kit includes an electronic handset, independent heads-up display, and a backplate/wing assembly that provides a complete kit ready to dive out of the box. The Prism 2 can be purchased with or without tanks/valves.
PLEASE CONTACT US FOR MORE INFORMATION ON THE HOLLIS PRISM 2